All Collections
Sounds: Guitar Profiles
Nigel Hendroff
Getting Started with Droff VX15 by Nigel Hendroff
Getting Started with Droff VX15 by Nigel Hendroff

Getting Started with Droff VX15 by Nigel Hendroff

Jesse Schaefer avatar
Written by Jesse Schaefer
Updated over a week ago

My English made AC15 has been the main contributing factor to the guitar tone of pretty much every Hillsong worship album I’ve worked on since it’s acquisition in 2004. It’s classic EL84 chime and sweet midrange has made this my go-to amp of choice of all this time.

The Jackson Audio Prism preamp boost, and the Jackson Audio Bloom compressor/EQ are 2 pedals that sit at the start of my pedal board signal chain and are the foundation of every sound I create. They are my ‘always on’ pedals that form the basis of my tone and feel for when I play, creating the perfect balance of breakup and sponginess that compliments my playing style. I've included two profiles in this bundle that highlight the beautiful harmony of these pedals running into my amp.

Installing via Rig Manager

  • Download Rig Manager at https://www.kemper-amps.com/downloads and install

  • Open the folder containing the Profiles you purchased from Multitracks.com and drag them into the Rig Manager App. They will show up in the local files tab in the app.

  • Connect your Kemper Profiler via USB cable to your computer and drag all the new Profiles to your Kemper. This can be done by dragging from the Local Files tab to the My Profiler tab.

  • Enjoy your new amp Profiles!

Installing via USB Thumb Drive

  • Take the USB that's been formatted for firmware updates and plug it into your PC/MAC.

  • Open folder named Shared and copy all the Profiles you purchased from Multitracks.com to this folder

  • Plug the USB in. Kemper should see the USB pretty quickly.

  • Inside the Kemper OS, push the external storage button.

  • Select Import.

  • Enjoy your new amp Profiles!

Did this answer your question?