The Engineer by Peter Burton is his take on a really special UK 1x12 combo amp. Designed from the ground up by a lab coat-wearing avionics engineer (hence the name!), hand-wired from premium components in the UK. It’s a single channel, 1x12 combo amp based around the EL34 valve. Playing this amp is a real treat – it has an immediacy and fullness to each note that is hard to come across, particularly at lower volumes. It takes pedal incredibly well and also has one of the lowerest noise-floors of any amp in its category.
Packed with 10 profiles for this bundle, Peter has baked in a few special pedals that make these profiles sing. They included the iconic Big Muff fuzz, Gunshot, Rat and a classic boost.
Profile Overview
01 - Hamstead, Lo, Bright, G 09, V03, Triode
02 - Hamstead, Lo, Bright, G 09, V03, Pentode
03 - Hamstead, Lo, Bright, Voice (T01, B11), G 08, V05, Pentode
04 - Hamstead, Lo, Voice (T01, B02) G 09, V05, Pentode
05 - Hamstead, Lo, Voice (T01, B02) G 12, V05, Pentode
06 - Hamstead, Lo, Voice (T12, B12) G 09, V12, Pentode - GE-7 & OP-AMP BIG MUFF
07 - Hamstead, Lo, Voice (T12, B12) G 09, V12, Pentode - TIMMY & GUNSHOT
08 - Hamstead, Lo, Voice (T12, B12) G 09, V12, Pentode - RAT
09 - Hamstead, Lo, Voice (T12, B12) G 09, V12, Pentode - SHO 1 (Super Hard On)
10 - Hamstead, Lo, Voice (T12, B12) G 09, V12, Pentode - SHO 2
Installing via Rig Manager
Download Rig Manager at https://www.kemper-amps.com/downloads and install
Open the folder containing the Profiles you purchased from Multitracks.com and drag them into the Rig Manager App. They will show up in the local files tab in the app.
Connect your Kemper Profiler via USB cable to your computer and drag all the new Profiles to your Kemper. This can be done by dragging from the Local Files tab to the My Profiler tab.
Enjoy your new amp Profiles!
Installing via USB Thumb Drive
Take the USB that's been formatted for firmware updates and plug it into your PC/MAC.
Open folder named Shared and copy all the Profiles you purchased from Multitracks.com to this folder
Plug the USB in. Kemper should see the USB pretty quickly.
Inside the Kemper OS, push the external storage button.
Select Import.
Enjoy your new amp Profiles!