Skip to main content
All CollectionsSounds: Guitar ProfilesBrian Carl
Getting Started with MRGN D40 by Brian Carl
Getting Started with MRGN D40 by Brian Carl

Getting Started with MRGN D40 by Brian Carl

Trevor avatar
Written by Trevor
Updated over a week ago

This is one of the only amps I will never ever sell. We’ve been through a lot and it’s still my favorite British voiced amp. These 15 profiles are of a dual channel 40 watt amp. The first channel is an all top boost-style full tone stack (treb/mid/bass) and uses 12ax7’s. The second channel is based on the normal channel of an AC30 (my personal fav) and uses an EF86 in the preamp section. I did 6 profiles of each channel, both at 20 and 40 watts and included a few special extra’s.

Installing via Rig Manager

  • Download Rig Manager at https://www.kemper-amps.com/downloads and install

  • Open the folder containing the Profiles you purchased from Multitracks.com and drag them into the Rig Manager App. They will show up in the local files tab in the app.

  • Connect your Kemper Profiler via USB cable to your computer and drag all the new Profiles to your Kemper. This can be done by dragging from the Local Files tab to the My Profiler tab.

  • Enjoy your new amp Profiles!

Installing via USB Thumb Drive

  • Take the USB that's been formatted for firmware updates and plug it into your PC/MAC.

  • Open folder named Shared and copy all the Profiles you purchased from Multitracks.com to this folder

  • Plug the USB in. Kemper should see the USB pretty quickly.

  • Inside the Kemper OS, push the external storage button.

  • Select Import.

  • Enjoy your new amp Profiles!

Did this answer your question?